**I am having supplier issues with this table. A friend makes them from drops from their sign biz. I will post up when one is in stock. I can make one to order, but the metal and waterjet time would make these way over $400.00 from traditional methods vs the $195.00 I charge for the “favor” method.**
ELS ZRX Engine Stand & Display Table This is a multi-purpose piece for your shop or home. You can work on the top-end, you can work on the tranny/crankshaft or you can just display your extra motor in the living room!
The table flips over easily and is INCREDIBLY strong! I was jumping up and down on the motor upside down and there’s not a hint of flex.
The lower case easily removes with the table upside down. The top comes off with four bolts and top end work is a breeze! No more chasing the motor around the floor 🙂 If you ever do motor work on a ZRX, you need this!
When you are not using this table, it breaks down and fits inside a 20″ x 20″ x 4″ box that you can slip under the bed or workbench.
You’ll need to supply your own tempered glass, butcherblock or Corian etc top if you choose to use it as a table. The top is 21-3/4″ deep by 19-1/4″ wide (18-1/2″ inside). The table is 25″ tall.
The table has a brushed aluminum finish. It can be left as-is, painted, polished, anodized or you can stick all those huge Ivan’s and Muzzys stickers you have on it.
Buy one for your bench-race group and you can share.
This is one of my KOOLEST projects!!
Fits ZRX1100/1200R, ZX11, ZZR1200, GPZ900 & Concours
WARNING: ELS Products MAY CONTAIN, or be Made With, Patented Parts, Tools, Components and/or Apparati. Manufacturing Facility DOES Contain Nuts