ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $250.00, plus $40.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $16.09 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
Titanium LadyBird "Loudener" Exhaust Bracket
$35.00
×
92055-1222 Float Bowl Gasket/O-Ring
$16.09
×
Brake Hose Clips
$9.00
×
11061-0988 Spark Plug Seal
$19.71
×
Öhlins and 1997-2003 ZRX Fork Cap Wrench
$45.00
×
11061-0987 ZRX1200 Valve Cover Gasket
$193.77
×
ZX11D Ignition ECU Diode Pack
$120.00
×
Titanium Thermostat Bracket
$75.00
×
PlaceholderZRX Front Brake Caliper Kit
$403.74
×
Titanium Rear Axle Clips
$40.00
×
11060-1771 ZRX1100 Valve Cover Gasket
$220.71
×
43020-1054 Brake Master Cylinder Kit
$118.06
×
KWICK's 1/4" Hex Thumb Driver
$6.00
×
LadyBird Carbon Fiber Exhaust Canister Sleeve
$345.00
×
Mo'Flo! and 2.5 Battery Tray
$45.00
×
Shorai LFX14A2-BS12 Battery Bracket
$135.00
×
92055-1352 Valve Cover Bolt Seal
$17.58
×
‘KWICK Gauge’ Water Temperature Gauge
$270.00
×
Öhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
PlaceholderPetcock O-Ring
$3.00
×
Yoshimura-Spec Camshafts
$1,156.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
"WORKS" Exhaust Hanger
$95.00
×
Fork-Off! Bug and Stone Protectors
$50.00
×
3D Printed 43mm RSU Fork Seal Driver
$30.00
×
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$21.00
×
EMERGENCY!! 10mm Socket
$20.00
×
CVK40 K&N Pod Adapters
$160.00
×
11009-1127 Copper Fork Gasket
$13.86
×
11061-1155 Pulser Ignition Cover Gasket
$20.55
×
Elusive Pilot Screw Washer
$0.75
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
43028-1058 Master Cylinder Diaphragm
$61.26
×
KWICK's Rad Radiator Bracket Set
$55.00
×
11009-1857 Reed Valve Gasket
$15.30
×
ZX9R Instrument Cluster Mount for ZRX1100-ZRX1200R
$50.00
×
K-Tric Block-Off Plates
$10.00
×
43020-1055 Clutch Master Cylinder Kit
$59.03
×
92068-006 Carb Sync Nipple
$8.02
×
KWICK Slip Slipper Clutch
$435.00
×
13088-1139 Clutch Friction Plate
$18.29
×
Brake Light Banjo Bolt Switch
$14.00
×
KWICK Throttle
$88.00
×