Trick Voltmeter

$14.00

Description

Run a Lithium battery? Try to get the most out of your battery? Is your ZRX over ten years old?

You need this neat little voltmeter. Fits in a 1-1/8″ hole. You can cut the dash with a stepped drill bit, or a Dremel, of an X-Acto knife.

I mounted mine like in the pictures and it is in my direct line of sight. It is not too bright at night, and unless the sun is at your back and up high, you can read it most of the time.

A “normal” ZRX puts out 15.1-15.3 volts when riding.

This voltmeter is waterproof and I’ve been running mine for way over five years now.

Comes with two spade connectors. I wire them into the marker light wire on most bikes.

Additional information

Weight .1 lbs
Cart
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
Titanium Thermostat BracketTitanium Thermostat Bracket
$25.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$3,468.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$336.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$90.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$240.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$80.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$256.00
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.94
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
Placeholder92143-1962 Spacer
$5.16
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×