ZRX/ZX11/ZL900/ZL1000/GPz1100 Cam Degreeing Tool Set

Price range: $125.00 through $155.00

Description

I’ve wanted to produce a ZRX-Specific cam degreeing kit for quite some time now. Dale Walker used to sell a generic kit, but over the years of using it I made ZRX-specific pieces to add to it.

  1. First off, the degree wheel on bikes is mounted on the left or right and that can get confusing. My degree wheel is numbered for the left end of the crank.

  1. Second, it’s hard to mount a magnetic indicator base to an aluminum cylinder head, so, I produced a thick steel plate that mounts to four of the cam cap bolts.

  2. Third, the cam is directly over the valve and it’s hard to get the dial indicator in a good position. I have sourced a set of dial indicator tips to allow a better angle of attack.

  3. Fourth, the printing and size of most degree wheels makes it very hard the see exactly where the pointer is so I make a larger degree wheel with Lasered letters/numbers that are very crisp. And, the center hole is 8mm for the included bolt, nuts and washer to center the degree wheel…most are 7/8” and you have jury-rig washers and try to center it.

  4. Fifth, I offer an optional digital indicator so you don’t have to use the small counter to get to the right spot.

  5. Sixth, most TDC Finders seal in the head and make it hard to precisely rotate the motor. I have machined a vent in mine.

  6. I include a reprint of an old SportRider Magazine pair of articles on how to degree cams…the best I have found….that makes it easy and understandable.

  7. I laser’d the Yoshimura cam specs on the degree wheel…because I could…and you can see the opening and closing so it’s understandable.

  8. I machine the 10mm piston stop/TDC finder and steel base myself.

Various hardware is included, but not shown in picture.

Content brands may change over time to get the best pricing possible.

Slotted Cam Sprockets Are Available!!

 
 

 

 

Additional information

Weight 2.5 lbs
Dial Indicator

Analog, Digital

Cart
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$30.00
×
KWICK ThrottleKWICK Throttle
$264.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$2,312.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$400.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
16099-003  Oil Filter16099-003 Oil Filter
$12.17
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$24.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$40.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
PlaceholderKWICK's Ti Petcock Seal Set
$9.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×