Friggin’ KWICK Valve Spring Tool

$50.00

In stock

Description

I’ve had this idea for well over ten years. Finally, I have created the tool many have been asking for. This tool enables one to change the valve springs without removing the cylinder head and with the motor still in the bike. It works excellent with the head removed, but the possibilities are Kool!

Change to ZX11/ZZR1200 valve springs, to enable the use of a ZX11D ECU, in an afternoon without removing the header, carbs nor having to buy a head gasket.

I have produced these in both Stainless Steel and Limited Edition Titanium (Ti no longer available 🙁 ….”Why Titanium?” you might ask… Because I could, that’s why! These are cut on the TechShop.ws WaterJet and are welded by an FAA Certified Welder.
A truly KOOL TOOL!

You will need to insert a piece of clothesline rope in each cylinder at BDC and rotate it up to hold the valves closed in that cylinder. You’ll have to have some mechanical skill to do this. A 1/4” ratchet operates the compressor.

 

Additional information

Weight .4 lbs
Cart
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$45.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$2,312.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$30.00
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$80.00
×