Trick Voltmeter

$14.00

Description

Run a Lithium battery? Try to get the most out of your battery? Is your ZRX over ten years old?

You need this neat little voltmeter. Fits in a 1-1/8″ hole. You can cut the dash with a stepped drill bit, or a Dremel, of an X-Acto knife.

I mounted mine like in the pictures and it is in my direct line of sight. It is not too bright at night, and unless the sun is at your back and up high, you can read it most of the time.

A “normal” ZRX puts out 15.1-15.3 volts when riding.

This voltmeter is waterproof and I’ve been running mine for way over five years now.

Comes with two spade connectors. I wire them into the marker light wire on most bikes.

Additional information

Weight .1 lbs
Cart
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$135.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
KWICK ThrottleKWICK Throttle
$440.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$23.08
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×