Carb O-Ring Set

$30.00

SKU: N/A Categories: ,

Description

Enough for all four carbs. 16 pieces.

How to install pilot o-rings:

Apply generous dose of WD40, or similar, to the O-Ring and Pilot Screw.

Slide on to the LARGEST diameter of the needle so it slightly compresses the spring & washer.

If you need to remove the pilot screw, remove the washer, spring and o-ring and reassemble before reinstalling.

Additional information

Weight .1 lbs
Carb O-Ring Set

16 Piece ZRX Set, 20 Piece ZX11C Set, 20 Piece ZX11D Set, 24 piece ZZR1200 Set

Cart
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$560.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$6,936.00
×
KWICK ThrottleKWICK Throttle
$616.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$30.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$30.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$34.88
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$41.85
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$40.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×