Mo’Flo! and 2.5 Battery Tray

$45.00

Categories: , , , , ,

Description

The Mo’Flo! Battery Tray

Included with the Mo’Flo! 40mm carb setup.

Also works excellent with the FactoryPro 2.5 Jet Kit. (The K&N Filter attaches to the ring)

Laser cut from 6061-T6 aluminum sheet and satin finished.

Complete with hardware and instructions.

Additional information

Weight 1.5 lbs

Related products

Remove Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
Remove Big Port Exhaust GasketsBig Port Exhaust Gaskets
Remove The STRAIGHTENATOR!!The STRAIGHTENATOR!!
Remove EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
Remove "WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
Remove Ivan's Jet KitsIvan's Jet Kits
Remove Titanium Rear Axle ClipsTitanium Rear Axle Clips
Remove KWICK ThrottleKWICK Throttle
Remove Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
Remove 3.0 Big Ass Storage Box3.0 Big Ass Storage Box
Cart
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$13.71
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$20.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$224.00
×
11061-1155 Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$25.11
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
PlaceholderPetcock O-Ring
$1.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$1,156.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
Checkout
-
$55.00