ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$90.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$26.18
×
Slipper Clutch White "Kit" SpringSlipper Clutch White "Kit" Spring
$6.43
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$19.90
×
16030-1057 Float Needle16030-1057 Float Needle
$141.93
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$3,468.00
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$131.50
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
Slipper Starfish Spring 39130-1071Slipper Starfish Spring 39130-1071
$11.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
Titanium Case GuardTitanium Case Guard
$45.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$13.71
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
PlaceholderPetcock O-Ring
$1.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×