ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$1,156.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$40.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
KWICK ThrottleKWICK Throttle
$264.00
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×