ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$38.86
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$45.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$15.30
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$1,156.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
16099-003  Oil Filter16099-003 Oil Filter
$24.34
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$65.75
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$120.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$60.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×