Trick Voltmeter

$14.00

Description

Run a Lithium battery? Try to get the most out of your battery? Is your ZRX over ten years old?

You need this neat little voltmeter. Fits in a 1-1/8″ hole. You can cut the dash with a stepped drill bit, or a Dremel, of an X-Acto knife.

I mounted mine like in the pictures and it is in my direct line of sight. It is not too bright at night, and unless the sun is at your back and up high, you can read it most of the time.

A “normal” ZRX puts out 15.1-15.3 volts when riding.

This voltmeter is waterproof and I’ve been running mine for way over five years now.

Comes with two spade connectors. I wire them into the marker light wire on most bikes.

Additional information

Weight .1 lbs
Cart
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$240.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$256.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$40.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$2,312.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$45.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$80.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×