ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$24.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$90.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$22.50
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$30.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$30.56
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$1,156.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$35.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
PlaceholderPetcock O-Ring
$1.00
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$65.75
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$13.71
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$40.00
×