ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$38.86
×
PlaceholderPetcock O-Ring
$3.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$164.50
×
16099-003  Oil Filter16099-003 Oil Filter
$24.34
×
KWICK ThrottleKWICK Throttle
$264.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$224.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$400.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$1,156.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$15.28
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$168.56
×
92049-1496 Fork Seal92049-1496 Fork Seal
$22.50
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$19.90
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$34.88
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$45.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$35.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$10.44
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×