ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
KWICK ThrottleKWICK Throttle
$264.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$870.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$60.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$90.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$50.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$8.26
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$28.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$22.50
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$80.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$30.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$256.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
PlaceholderPetcock O-Ring
$1.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×