ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$150.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$160.00
×
KWICK ThrottleKWICK Throttle
$264.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$2,312.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$120.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$45.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$90.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
Sto'Mo! Underseat Storage BagSto'Mo! Underseat Storage Bag
$97.50
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$75.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$23.08
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
Titanium Case GuardTitanium Case Guard
$90.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
PlaceholderKWICK's Ti Petcock Seal Set
$9.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×