ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$10.44
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$240.00
×
92049-1496 Fork Seal92049-1496 Fork Seal
$45.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
16030-1057 Float Needle16030-1057 Float Needle
$94.62
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$3,468.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$150.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$384.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$80.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$90.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$45.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
Trick VoltmeterTrick Voltmeter
$14.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$45.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$30.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$8.26
×
LadyBird Carbon Fiber Exhaust Canister SleeveLadyBird Carbon Fiber Exhaust Canister Sleeve
$115.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$16.74
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
CNC'd Mirror ExtendersCNC'd Mirror Extenders
$24.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×