Friggin’ KWICK Valve Spring Tool

$50.00

In stock

Description

I’ve had this idea for well over ten years. Finally, I have created the tool many have been asking for. This tool enables one to change the valve springs without removing the cylinder head and with the motor still in the bike. It works excellent with the head removed, but the possibilities are Kool!

Change to ZX11/ZZR1200 valve springs, to enable the use of a ZX11D ECU, in an afternoon without removing the header, carbs nor having to buy a head gasket.

I have produced these in both Stainless Steel and Limited Edition Titanium (Ti no longer available 🙁 ….”Why Titanium?” you might ask… Because I could, that’s why! These are cut on the TechShop.ws WaterJet and are welded by an FAA Certified Welder.
A truly KOOL TOOL!

You will need to insert a piece of clothesline rope in each cylinder at BDC and rotate it up to hold the valves closed in that cylinder. You’ll have to have some mechanical skill to do this. A 1/4” ratchet operates the compressor.

 

Additional information

Weight .4 lbs
Cart
Brake Hose ClipsBrake Hose Clips
$3.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$180.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$4,624.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$105.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$336.00
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$15.30
×
Placeholder92143-1962 Spacer
$5.16
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$40.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$90.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$2.25
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$80.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$60.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$100.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$240.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$13.71
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×