Mo’Flo! and 2.5 Battery Tray

$45.00

Categories: , , , , ,

Description

The Mo’Flo! Battery Tray

Included with the Mo’Flo! 40mm carb setup.

Also works excellent with the FactoryPro 2.5 Jet Kit. (The K&N Filter attaches to the ring)

Laser cut from 6061-T6 aluminum sheet and satin finished.

Complete with hardware and instructions.

Additional information

Weight 1.5 lbs

Related products

Remove Placeholder92055-1426 Float Bowl Gasket
Remove Titanium CVK40 Idle Adjustment Cable Holder
Remove Tensioner Tamer™ Alternator/Starter Chain Tensioner Fix
Remove Öhlins Shock Reseal Service at ELS!
Remove Placeholder671B2590 O-Ring
Remove 3.0 Big Ass Storage Box
Remove WORLD's Lightest Manual PetCock for the ZRX
Remove EMERGENCY!! 10mm Socket
Remove PlaceholderKWICK's Jet Kits for CVK40 ZX11/ZZR1200 Carbs on a ZRX
Remove 92055-1112 Petcock Seal
Remove 92055-1222 Float Bowl Gasket/O-Ring
Remove Fork-Off! Bug and Stone Protectors
Remove Friggin' KWICK Valve Spring Tool
Remove Titanium Rear Axle Clips
Remove Galfer Speigler Black Aluminum Banjo Bolts
Remove LED Turnsignal Relay
Remove Placeholder92022-1012 Oil Filter Washer
Remove Dual Bung Thermostat Housing
Remove CNC'd Mirror Extenders
Remove 16030-1057 Float Needle
Remove KWICK Slip Slipper Clutch
Remove K-Tric Block-Off Plates
Remove ZX-4RR Carbon Fiber & Kevlar Radiator Screen
Remove Öhlins and 1997-2003 ZRX Fork Cap Wrench
Remove KWICK's Ignition Timing Advancer
Remove Custom Brake/Clutch Master Cylinder Cover
Remove Placeholder92075-1634 Radiator Shroud Grommet
Remove Carbon Fiber & Kevlar Mesh Radiator Screen
Remove ‘KWICK Gauge’ Water Temperature Gauge
Remove FactoryPro Stuff:
Remove 43020-1057 Rear Brake Mastercylinder Kit
Remove K&N Pod Air Filters
Remove 11009-1127 Copper Fork Gasket
Remove Placeholder92059-1140 Vacuum Hose
Remove 13088-040 Clutch Friction Plate
Remove 11009-1857 Reed Valve Gasket
Remove Brake & Clutch Banjo Bolt Washers
Remove 3D Printed Vise Soft Jaws
Remove Trick Voltmeter
Remove KWICK's 1/4" Hex Thumb Driver
Remove Placeholder670B2016 O-Ring
Remove 13187-1055 Slipper Clutch Pressure Plate
Remove 13089-1004 Clutch Steel Plate
Remove 17mm "sorta" 99-2003 ZRX Fork Preload Socket
Remove Placeholder92143-1962 Spacer
Remove LadyBird Carbon Fiber Exhaust Canister Sleeve
Remove 18.5mm ZRX Laser-Cut Float Level Gauge
Remove NEW "Mo’ Mo' Better!" Bar End Mirrors
Remove KWICK Throttle
Remove 3D Printed 43mm RSU Fork Seal Driver
Remove Öhlins Dual Shock Disassembly Tool Set
Remove Yoshimura-Spec Camshafts
Cart
Brake Hose Clips
$9.00
×
Placeholder92055-1426 Float Bowl Gasket
$38.68
×
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$7.00
×
EMERGENCY!! 10mm Socket
$20.00
×
Titanium Thermostat Bracket
$50.00
×
Shorai LFX14A2-BS12 Battery Bracket
$45.00
×
Placeholder92065-097 Drain Plug Aluminum Gasket
$1.91
×
KWICK's Rad Radiator Bracket Set
$110.00
×
11060-1771 ZRX1100 Valve Cover Gasket
$147.14
×
ZX11D Ignition ECU Diode Pack
$60.00
×
Slipper Clutch White "Kit" Spring
$6.43
×
PlaceholderZRX Front Brake Caliper Kit
$134.58
×
‘KWICK Gauge’ Water Temperature Gauge
$135.00
×
KWICK's 1/4" Hex Thumb Driver
$2.00
×
11061-0987 ZRX1200 Valve Cover Gasket
$129.18
×
K-Tric Block-Off Plates
$10.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Brake Light Banjo Bolt Switch
$14.00
×
PlaceholderZRX Rear Brake Caliper Kit
$28.11
×
92068-006 Carb Sync Nipple
$4.01
×
PlaceholderPetcock O-Ring
$1.00
×
13187-1055 Slipper Clutch Pressure Plate
$69.13
×
Checkout
-
$69.13