ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $250.00, plus $40.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $16.09 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
CVK40 K&N Pod Adapters
$80.00
×
KWICK Slip Slipper Clutch
$1,305.00
×
PlaceholderK&N Vent Filter
$72.00
×
Genuine Hella 80/100 H4 Headlight Bulb
$14.00
×
Titanium Thermostat Bracket
$25.00
×
11060-1771 ZRX1100 Valve Cover Gasket
$73.57
×
92015-1929 Slipper Clutch one-use Nut
$22.51
×
PlaceholderPetcock O-Ring
$1.00
×
KWICK Rad Radiator
$2,625.00
×
Yoshimura-Spec Camshafts
$3,468.00
×
Shorai LFX14A2-BS12 Battery Bracket
$90.00
×
PlaceholderKWICK's Ti Petcock Seal Set
$9.00
×
11009-1857 Reed Valve Gasket
$7.65
×
92055-1222 Float Bowl Gasket/O-Ring
$16.09
×
Slipper Clutch White "Kit" Spring
$6.43
×
K-Tric Block-Off Plates
$10.00
×
PlaceholderZRX Front Brake Caliper Kit
$67.29
×
Öhlins and 1997-2003 ZRX Fork Cap Wrench
$15.00
×
‘KWICK Gauge’ Water Temperature Gauge
$135.00
×
3D Printed 43mm RSU Fork Seal Driver
$15.00
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.34
×
CNC'd Mirror Extenders
$24.00
×