ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
Brake Hose ClipsBrake Hose Clips
$6.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$150.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$337.12
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$100.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$80.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$105.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$45.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$4,624.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$60.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$140.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$120.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$45.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$150.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$27.42
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$15.28
×
16099-003  Oil Filter16099-003 Oil Filter
$12.17
×