ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$66.21
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
PlaceholderZRX Front Brake Caliper Kit
$117.18
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$80.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$30.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$5,780.00
×
Titanium Case GuardTitanium Case Guard
$90.00
×
KWICK Douche' Fuel Tank Cleaning Block-Off Plate KitKWICK Douche' Fuel Tank Cleaning Block-Off Plate Kit
$56.00
×
PlaceholderPetcock O-Ring
$1.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$240.00
×
PlaceholderHarbor Flood Light
$16.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$400.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
16099-003  Oil Filter16099-003 Oil Filter
$12.17
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
Aluminum PAIR Block-Off PlatesAluminum PAIR Block-Off Plates
$25.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$15.66
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$34.88
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$22.92
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$225.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$38.86
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$25.11
×
KWICK ThrottleKWICK Throttle
$352.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$23.08
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$512.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$131.50
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Placeholder92143-1962 Spacer
$5.16
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×