Friggin’ KWICK Valve Spring Tool

$50.00

In stock

Description

I’ve had this idea for well over ten years. Finally, I have created the tool many have been asking for. This tool enables one to change the valve springs without removing the cylinder head and with the motor still in the bike. It works excellent with the head removed, but the possibilities are Kool!

Change to ZX11/ZZR1200 valve springs, to enable the use of a ZX11D ECU, in an afternoon without removing the header, carbs nor having to buy a head gasket.

I have produced these in both Stainless Steel and Limited Edition Titanium (Ti no longer available 🙁 ….”Why Titanium?” you might ask… Because I could, that’s why! These are cut on the TechShop.ws WaterJet and are welded by an FAA Certified Welder.
A truly KOOL TOOL!

You will need to insert a piece of clothesline rope in each cylinder at BDC and rotate it up to hold the valves closed in that cylinder. You’ll have to have some mechanical skill to do this. A 1/4” ratchet operates the compressor.

 

Additional information

Weight .4 lbs
Cart
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$175.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$448.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$10.44
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$2,312.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$30.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$80.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$60.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$30.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$131.50
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$90.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
LED Turnsignal RelayLED Turnsignal Relay
$40.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$28.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.94
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$80.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
PlaceholderPetcock O-Ring
$1.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$45.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×