ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
CNC'd Mirror ExtendersCNC'd Mirror Extenders
$24.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$5,780.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$150.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
KWICK ThrottleKWICK Throttle
$440.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$60.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$34.88
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$60.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$560.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$50.00
×
PlaceholderPetcock O-Ring
$2.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$35.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$200.00
×
PlaceholderHarbor Flood Light
$16.00
×
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder  Heat Insulator/SpacerLazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$14.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$20.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$45.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$25.11
×
ZX-4RR Carbon Fiber & Kevlar Radiator ScreenZX-4RR Carbon Fiber & Kevlar Radiator Screen
$175.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$8.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$135.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$22.07
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$70.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$870.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
Titanium Case GuardTitanium Case Guard
$45.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
Placeholder92143-1962 Spacer
$5.16
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×