ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$240.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$60.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$336.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.94
×
Titanium Case GuardTitanium Case Guard
$180.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$28.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$120.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$67.50
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$15.66
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$140.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$200.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$36.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$300.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$12,716.00
×
KWICK ThrottleKWICK Throttle
$176.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$135.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$90.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$180.00
×
PlaceholderZRX Front Brake Caliper Kit
$117.18
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$640.00
×
Sto'Mo! Underseat Storage BagSto'Mo! Underseat Storage Bag
$32.50
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$135.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$160.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$23.08
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$30.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$80.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$4.00
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$40.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$95.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$4.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
PlaceholderKWICK's Ti Petcock Seal Set
$9.00
×