ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$112.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$26.18
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$100.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench
$30.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$10,404.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$28.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$20.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$120.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$480.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$135.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$105.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
LED Turnsignal RelayLED Turnsignal Relay
$40.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$135.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$22.95
×
PlaceholderPetcock O-Ring
$1.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$87.20
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
Titanium Case GuardTitanium Case Guard
$135.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$46.16
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
KWICK ThrottleKWICK Throttle
$88.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$45.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$50.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$70.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$4.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×