ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $250.00, plus $40.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $16.09 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
ZX11D Ignition ECU Diode Pack
$80.00
×
KWICK Throttle
$176.00
×
Brake Hose Clips
$3.00
×
ZX9R Instrument Cluster Mount for ZRX1100-ZRX1200R
$75.00
×
Titanium Rear Axle Clips
$20.00
×
EMERGENCY!! 10mm Socket
$40.00
×
PlaceholderZRX Front Brake Caliper Kit
$67.29
×
K-Tric Block-Off Plates
$10.00
×
Shorai LFX14A2-BS12 Battery Bracket
$135.00
×
16099-003 Oil Filter
$22.88
×
CVK40 K&N Pod Adapters
$160.00
×
Öhlins RSU Fork-Off! Stone/Bug Deflectors
$105.00
×
KWICK Rad Radiator
$1,750.00
×
PlaceholderZRX Rear Brake Caliper Kit
$56.22
×
Mo'Flo! and 2.5 Battery Tray
$90.00
×
92049-1496 Fork Seal
$20.89
×
92068-006 Carb Sync Nipple
$4.01
×
11061-0987 ZRX1200 Valve Cover Gasket
$193.77
×
Titanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
KWICK's Rad Radiator Bracket Set
$55.00
×
3D Printed 43mm RSU Fork Seal Driver
$30.00
×
Yoshimura-Spec Camshafts
$2,312.00
×
LadyBird Carbon Fiber Exhaust Canister Sleeve
$115.00
×
‘KWICK Gauge’ Water Temperature Gauge
$405.00
×
Placeholder92093-1480 Fork Dust Seal
$17.41
×
11060-1771 ZRX1100 Valve Cover Gasket
$147.14
×
13088-040 Clutch Friction Plate
$23.56
×
Slipper Clutch White "Kit" Spring
$12.86
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.34
×
43020-1055 Clutch Master Cylinder Kit
$59.03
×
13089-1004 Clutch Steel Plate
$12.33
×