ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
PlaceholderZRX Front Brake Caliper Kit
$175.77
×
KWICK ThrottleKWICK Throttle
$704.00
×
PlaceholderKWICK's Ti Petcock Seal Set
$27.00
×
Titanium Case GuardTitanium Case Guard
$315.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$270.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$160.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$140.00
×
No'Flo! Emission PAIR Block Off Plug SetNo'Flo! Emission PAIR Block Off Plug Set
$18.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$33.48
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$225.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$10.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$300.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$22.92
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$672.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$3,468.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$150.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$60.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$36.00
×
92049-1496 Fork Seal92049-1496 Fork Seal
$45.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$180.00
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.94
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$225.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$175.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$30.00
×
Brake Hose ClipsBrake Hose Clips
$9.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$200.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$45.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$180.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$2.25
×
Sto'Mo! Underseat Storage BagSto'Mo! Underseat Storage Bag
$32.50
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$60.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
16030-1057 Float Needle16030-1057 Float Needle
$47.31
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$4.00
×
LED Turnsignal RelayLED Turnsignal Relay
$20.00
×
Carbon Fiber Rear Axle Retaining ClipsCarbon Fiber Rear Axle Retaining Clips
$20.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×