ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
KWICK ThrottleKWICK Throttle
$440.00
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
PlaceholderKWICK's Ti Petcock Seal Set
$18.00
×
Brake Hose ClipsBrake Hose Clips
$6.00
×
16099-003  Oil Filter16099-003 Oil Filter
$12.17
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$160.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$360.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$336.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$45.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$480.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$40.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$45.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$180.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$15.28
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$66.21
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$315.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$270.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$3,045.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$20.88
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$45.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$46.16
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$5,780.00
×
PlaceholderZRX Front Brake Caliper Kit
$117.18
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×
PlaceholderPetcock O-Ring
$1.00
×
Titanium Case GuardTitanium Case Guard
$180.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$33.48
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$70.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$105.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$128.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×