ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$25.11
×
KWICK ThrottleKWICK Throttle
$616.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$405.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$225.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$2.25
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$75.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$80.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$8,092.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$90.00
×
PlaceholderPetcock O-Ring
$2.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$270.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$320.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$88.28
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$760.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$46.16
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$224.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$240.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$256.00
×
Titanium Case GuardTitanium Case Guard
$90.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$225.00
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
PlaceholderHarbor Flood Light
$16.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
KWICK Douche' Fuel Tank Cleaning Block-Off Plate KitKWICK Douche' Fuel Tank Cleaning Block-Off Plate Kit
$28.00
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$720.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$225.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$90.00
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$140.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$50.00
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$22.50
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
Placeholder92143-1962 Spacer
$5.16
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$20.00
×