ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$448.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$26.18
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$45.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$4,785.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$6.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$270.00
×
KWICK ThrottleKWICK Throttle
$440.00
×
LED Turnsignal RelayLED Turnsignal Relay
$80.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$330.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$90.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$36.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$320.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$120.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$42.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$5.22
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$760.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$210.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$4.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$13,872.00
×
Sto'Mo! Underseat Storage BagSto'Mo! Underseat Storage Bag
$65.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
Placeholder13088-1087 ZRX1100 Clutch Friction Plate
$19.94
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$8.37
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$66.21
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$225.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$200.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$160.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$150.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$80.00
×
Titanium Case GuardTitanium Case Guard
$360.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$640.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$46.16
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$30.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$110.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$7.65
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$4.13
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×