ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
KWICK ThrottleKWICK Throttle
$968.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$80.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$512.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$11,560.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$240.00
×
Trick VoltmeterTrick Voltmeter
$14.00
×
Titanium Case GuardTitanium Case Guard
$135.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$8.26
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
Fork-Off! Bug and Stone ProtectorsFork-Off! Bug and Stone Protectors
$25.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$44.14
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$180.00
×
Sto'Mo! Underseat Storage BagSto'Mo! Underseat Storage Bag
$65.00
×
PlaceholderZRX Rear Brake Caliper Kit
$50.34
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$480.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$180.00
×
17mm "sorta" 99-2003 ZRX Fork Preload Socket17mm "sorta" 99-2003 ZRX Fork Preload Socket
$12.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$40.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$35.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$80.00
×
LED Turnsignal RelayLED Turnsignal Relay
$40.00
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$120.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$870.00
×
PlaceholderPetcock O-Ring
$1.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$45.00
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
LadyBird Carbon Fiber Exhaust Canister SleeveLadyBird Carbon Fiber Exhaust Canister Sleeve
$115.00
×
92028-1784    Fork Bushing92028-1784 Fork Bushing
$23.08
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$45.00
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$15.66
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
No'Flo! Emission PAIR Block Off Plug SetNo'Flo! Emission PAIR Block Off Plug Set
$18.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$4.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$28.00
×
CNC'd Mirror ExtendersCNC'd Mirror Extenders
$24.00
×
Placeholder92143-1962 Spacer
$5.16
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$22.50
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
M10x1.0 Compression Spark Plug Adapter Modded for ZRXM10x1.0 Compression Spark Plug Adapter Modded for ZRX
$16.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$9.95
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×