ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder  Heat Insulator/SpacerLazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$14.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$320.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$4.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$29.85
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$154.49
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$68.55
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$15.30
×
16030-1057 Float Needle16030-1057 Float Needle
$283.86
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$6,936.00
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
PlaceholderPetcock O-Ring
$1.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$140.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$50.08
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$90.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$20.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$289.76
×
KWICK ThrottleKWICK Throttle
$528.00
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$256.00
×
18.5mm ZRX Laser-Cut Float Level Gauge18.5mm ZRX Laser-Cut Float Level Gauge
$2.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$285.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$197.25
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$160.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$58.29
×
11009-1127 Copper Fork Gasket11009-1127 Copper Fork Gasket
$15.66
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$50.22
×
Aluminum PAIR Block-Off PlatesAluminum PAIR Block-Off Plates
$25.00
×
PlaceholderZRX Front Brake Caliper Kit
$175.77
×
16099-003  Oil Filter16099-003 Oil Filter
$24.34
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$84.28
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$60.00
×
Genuine Hella 80/100 H4 Headlight BulbGenuine Hella 80/100 H4 Headlight Bulb
$14.00
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$40.00
×
92049-1496 Fork Seal92049-1496 Fork Seal
$22.50
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$75.00
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$131.50
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$30.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$60.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$90.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$7.64
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$10.00
×
M10x1.0 Compression Spark Plug Adapter Modded for ZRXM10x1.0 Compression Spark Plug Adapter Modded for ZRX
$16.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$45.00
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$30.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
KWICK Douche' Fuel Tank Cleaning Block-Off Plate KitKWICK Douche' Fuel Tank Cleaning Block-Off Plate Kit
$56.00
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$15.00
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$100.00
×