ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
KWICK ThrottleKWICK Throttle
$528.00
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$38.86
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$54.84
×
No'Flo! Emission PAIR Block Off Plug SetNo'Flo! Emission PAIR Block Off Plug Set
$36.00
×
92055-1352 Valve Cover Bolt Seal92055-1352 Valve Cover Bolt Seal
$49.75
×
PlaceholderHarbor Flood Light
$32.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$300.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$448.00
×
3D Printed 43mm RSU Fork Seal Driver3D Printed 43mm RSU Fork Seal Driver
$15.00
×
KWICK Slip Slipper ClutchKWICK Slip Slipper Clutch
$435.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$44.14
×
1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench1997-2003 ZRX Fork Preload and Cartridge Bottom Wrench
$30.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$380.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$480.00
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
Titanium Case GuardTitanium Case Guard
$90.00
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
11009-1857  Reed Valve Gasket11009-1857 Reed Valve Gasket
$30.60
×
Titanium LadyBird "Loudener" Exhaust BracketTitanium LadyBird "Loudener" Exhaust Bracket
$70.00
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$100.00
×
LazzzerAlign Lazzzer Laser Chain Alignment ToolLazzzerAlign Lazzzer Laser Chain Alignment Tool
$55.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$8,092.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$180.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$12.39
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$20.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$280.00
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$252.84
×
Friggin' KWICK Valve Spring ToolFriggin' KWICK Valve Spring Tool
$100.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$180.00
×
LED Turnsignal RelayLED Turnsignal Relay
$40.00
×
PlaceholderPetcock O-Ring
$3.00
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$263.00
×
PlaceholderZRX Front Brake Caliper Kit
$58.59
×
M10x1.0 Compression Spark Plug Adapter Modded for ZRXM10x1.0 Compression Spark Plug Adapter Modded for ZRX
$16.00
×
Brake Hose ClipsBrake Hose Clips
$6.00
×
PlaceholderZRX Rear Brake Caliper Kit
$25.17
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$45.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$150.00
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$35.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$41.85
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$17.44
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$90.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$0.75
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
ZRX Brake Bleeder ToolZRX Brake Bleeder Tool
$22.50
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder  Heat Insulator/SpacerLazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$7.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$82.25
×
LadyBird Carbon Fiber Exhaust Canister SleeveLadyBird Carbon Fiber Exhaust Canister Sleeve
$115.00
×