ZRX/ZX11/ZX7 Carb Disassembly, Cleaning & Reassembly

Description

Ship Carbs To:
ELS
315 West Elliot Road
SUITES 107-487
Tempe, AZ 85284

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!
The shipping address is The UPS Store in a LARGE industrial complex and without, the mail/UPS person has no CLUE where it goes. And nicknames do not make it easier…really.

Ship with a minimum of two inches of newspaper, in a NEW box…UPS and FedEx will not pay for damage in used boxes. The Post Office will NEVER pay a damage/loss claim, so if you care, ship UPS or FedEx. Do not ship with bubble wrap, it gets punctured and your carbs can get damaged. 

Remember, your carbs will be treated to an eight foot drop-kick, package accordingly please. 

VERY IMPORTANT: PUT THE SUITE NUMBERS ON THE BOX!!!

Also VERY IMPORTANT: Please put a note in the box with ship to address, phone number(s), email address and what you need done. Often packages get shipped with a grocery store name and address, a UPS Store address…Your carbs will sit around until you call to see why you have not heard from me, this is why. 

**********************************************************

Carb Disassembly, Cleaning & Reassembly at www.VenturiCity.com

For ZRXs. Carb set gets disassembled down to the last piece, carbs are soaked in carb dip, all passages cleaned, new o-rings installed and reassembled.

Usually three to twelve working day turnaround, but sometimes a bit longer depending on seasonal demand 🙂

Labor is $275.00, plus $45.00 shipping via UPS.

Any other parts required are extra. Float Bowl o-rings seem to have started needing replacement on about 95% of the carbs I do, they are $17.42 each, four are required. Carb O-Ring set is $30.00. Your carbs will need to be sync’d when reinstalled.

***

Best sync tool out there:

https://www.saber-cycle.com/Mercury-carburetor-synchronizer-w-5mm-6mm-adapters_p_1971.html

***

UPDATE

If your carbs look like the ones below on the inside, outside or both, expect to pay a surcharge of $25 to $100 to clean them. The ZRX is becoming a vintage bike and some serious neglect has been showing up.

The above two took way over twice as long to go thru.

Cart
16099-003  Oil Filter16099-003 Oil Filter
$24.34
×
TITANIUM Block Off PlatesTITANIUM Block Off Plates
$150.00
×
15410-19E10 Suzuki Fuel Filter15410-19E10 Suzuki Fuel Filter
$110.35
×
Öhlins RSU Fork-Off! Stone/Bug DeflectorsÖhlins RSU Fork-Off! Stone/Bug Deflectors
$105.00
×
Mo'Flo! and 2.5 Battery TrayMo'Flo! and 2.5 Battery Tray
$135.00
×
11061-0987 ZRX1200 Valve Cover Gasket11061-0987 ZRX1200 Valve Cover Gasket
$72.44
×
Shorai LFX14A2-BS12 Battery BracketShorai LFX14A2-BS12 Battery Bracket
$135.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$80.00
×
11061-0988 Spark Plug Seal11061-0988 Spark Plug Seal
$22.92
×
13187-1055 Slipper Clutch Pressure Plate13187-1055 Slipper Clutch Pressure Plate
$337.12
×
13088-1139 Clutch Friction Plate13088-1139 Clutch Friction Plate
$19.43
×
WORLD's Lightest Manual PetCock for the ZRXWORLD's Lightest Manual PetCock for the ZRX
$512.00
×
Yoshimura-Spec CamshaftsYoshimura-Spec Camshafts
$6,936.00
×
3.0 Big Ass Storage Box3.0 Big Ass Storage Box
$560.00
×
KWICK ThrottleKWICK Throttle
$880.00
×
KWICK's Rad Radiator Bracket SetKWICK's Rad Radiator Bracket Set
$135.00
×
Tensioner Tamer™ Alternator/Starter Chain Tensioner FixTensioner Tamer™ Alternator/Starter Chain Tensioner Fix
$360.00
×
PlaceholderZRX Rear Brake Caliper Kit
$125.85
×
K-Tric Titanium Block-Off PlateK-Tric Titanium Block-Off Plate
$100.00
×
11060-1771 ZRX1100 Valve Cover Gasket11060-1771 ZRX1100 Valve Cover Gasket
$575.75
×
Big Port Exhaust GasketsBig Port Exhaust Gaskets
$90.00
×
K&N Pod Side Cover Bracket SetK&N Pod Side Cover Bracket Set
$320.00
×
LED Turnsignal RelayLED Turnsignal Relay
$40.00
×
PlaceholderZRX Front Brake Caliper Kit
$175.77
×
PlaceholderPetcock O-Ring
$2.00
×
Elusive Pilot Screw WasherElusive Pilot Screw Washer
$1.50
×
Öhlins and 1997-2003 ZRX Fork Cap WrenchÖhlins and 1997-2003 ZRX Fork Cap Wrench

Available on backorder

$90.00
×
CVK40 K&N Pod AdaptersCVK40 K&N Pod Adapters
$480.00
×
LadyBird Carbon Fiber Exhaust Canister SleeveLadyBird Carbon Fiber Exhaust Canister Sleeve
$230.00
×
92055-1222 Float Bowl Gasket/O-Ring92055-1222 Float Bowl Gasket/O-Ring
$87.20
×
Titanium Rear Axle ClipsTitanium Rear Axle Clips
$40.00
×
11061-1155  Pulser Ignition Cover Gasket11061-1155 Pulser Ignition Cover Gasket
$16.74
×
Titanium Case GuardTitanium Case Guard
$135.00
×
43020-1055 Clutch Master Cylinder Kit43020-1055 Clutch Master Cylinder Kit
$131.50
×
ZX11D Ignition ECU Diode PackZX11D Ignition ECU Diode Pack
$40.00
×
"WORKS" Exhaust Hanger"WORKS" Exhaust Hanger
$190.00
×
43020-1054 Brake Master Cylinder Kit43020-1054 Brake Master Cylinder Kit
$65.75
×
Lazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder  Heat Insulator/SpacerLazzzer-Cut Kawasaki ZRX Clutch Slave Cylinder Heat Insulator/Spacer
$7.00
×
92068-006 Carb Sync Nipple92068-006 Carb Sync Nipple
$8.26
×
13088-040 Clutch Friction Plate13088-040 Clutch Friction Plate
$12.52
×
11061-1154 Clutch Cover Gasket11061-1154 Clutch Cover Gasket
$13.71
×
13089-1004 Clutch Steel Plate13089-1004 Clutch Steel Plate
$13.09
×
M10x1.0 Compression Spark Plug Adapter Modded for ZRXM10x1.0 Compression Spark Plug Adapter Modded for ZRX
$16.00
×
KWICK's 1/4" Hex Thumb DriverKWICK's 1/4" Hex Thumb Driver
$2.00
×
Fork 17mm Front Axle SocketFork 17mm Front Axle Socket
$15.00
×
Brake Hose ClipsBrake Hose Clips
$3.00
×
Öhlins Dual Shock Disassembly Tool SetÖhlins Dual Shock Disassembly Tool Set
$75.00
×
Brake Light Banjo Bolt SwitchBrake Light Banjo Bolt Switch
$14.00
×